Eclipse® Marking Systems
For the Ultimate in High Speed, High Quality Product Identification, Lamp-Pumped ECLIPSE ® is designed for hard surface treatments. It's the powerful, reliable choice for marking titanium and their high strength alloys, medical implants and hard plastics.
Click
on the PRODUCT MODEL NUMBER
for a brochure with full specifications, accessories and available videos
of our products in action. Product
Specification Sheets
and CAD
Drawings,
in some cases will also be available in this area.
What
Our Customers Are Saying...
I've been in the metalworking industry for more years than I care to count. All too frequently getting service after the bills have been paid is difficult. In our case the integrator is no longer in business, but Telesis was there to ensure that our system was operating within the proper parameters. Your Technician Chris was knowledgeable and more than willing to help us sort through some mechanical problems unrelated to the laser system itself. This type of customer service demands acknowledgement. I commend you and your staff and you may rest assured that, when the need arises, Telesis will be at the top of our list when considering laser marking systems.
Thanks and best regards,
Dennis N. Price
Quality Systems Manager
SGS Tool Company
Munroe Falls, OH 44262-0187
http://www.sgstool.com
"All of your employees seem to be willing and able to give that "little bit extra" to make everything go right.
The laser marking equipment you have supplied to us thus far has been totally reliable and continues to perform flawlessly helping Federal-Mogul Corporation to reduce costs as it continues to improve product quality. I look forward to a continued relationship with the people I consider my "friends" at Telesis Technologies."
Best Regards,
Ed Reinemeyer
Process Engineer, Federal-Mogul Corporation
|
FEATURES:
|
All
Marking Head Components and Assembly |
||||||||
SPECIFICATIONS:
Compliance ....................................................
CDRH, CE, UID
Type .............................................................. Nd: Lamp-pumped
YAG
Wavelength .................................................... 1,064 Nm
Average Power ............................................... 100 Watts
Mode.............................................................. Q-Switched
or CW
(Continuous Wave)
Q-Switch Frequency ....................................... 0 to 100 KHz
Marking Speed .............................................. .02 to 197 in/sec
(.5 to 5000 mm/sec.)
Marking Fields ............................................... Several Available
Electrical ....................................................... 3 phase/3
wire, 230V.
50-60Hz nominal
Total System Power Consumption ................... 7.5 KVA
Internal DI Water ............................................ Requires (5)
gallons, steam distilled
External Cooling Water ................................... 5 gallons/min.
(19 liters/min.)
50º F - 65º F, (10º- 18º C)
LENS CONFIGURATIONS AVAILABLE:
| Focal Length | Marking Field | Work Clearance |
|---|---|---|
| 100mm | 45mm x 45mm (1.8" x 1.8") | 97mm (3.82") |
| 160mm | 90mm x 90mm (3.5" x 3.5") | 176mm (6.93") |
| 163mm | 110mm x 110mm (4.3" x 4.3") | 185mm (7.28") |
| 254mm | 155mm x 155mm (6.1" x 6.1") | 296mm (11.65") |
| * 330mm | 215mm x 215mm (8.4" x 8.4") | 387mm (15.23") |
| * 420mm | 275mm x 275mm (10.8" x 10.8") | 493mm (19.40") |
| * Application dependent | ||
Features DATA MATRIXTM
2-D Code Marking Capability - Meets all
Department of Defense UID Requirements
 |
What separates Telesis from the others is the way they
believe in and stand behind their products. In our business, we see
everyone prior to purchasing. It's after the
initial purchase where we really need you - and Telesis "delivers". |
LASER CONTROLLER/DI WATER CABINET FEATURES:
- Compact, "All in One Design" Mounted on Casters
- Slide-out DI Water System / DI and Particle Filters
- Flow, Temperature and DI Sensors
- Keyswitch and E-Stop with Manual Shutter Control
- 1 st Pulse Suppression Circuitry
MERLIN II®LASER SOFTWARE FEATURES:
- Specially Designed by TELESIS - based on WINDOWS® NT and 2000 Platforms
-
Import a wide
range of Graphic Formats including DXF from AutoCADT, WINDOWS® Bitmaps, True
Type Fonts as Vector or Raster Files
- Supports 4 Axis Movement (XYZ & Rotary).
- Highlight, click and mark !
COMPUTER REQUIREMENTS:
- Pentium® III 128 Mb RAM (minimum), Multi-gigabyte HDD
- Video, Sound Card
- CD-ROM and 3.5" Floppy Disk Drive
- SVGA Monitor, Mouse and Keyboard
Telesis is the leader in product identification technology. Our factory integrated systems are found in a wide range of manufacturing settings around the world. All Telesis products - Standard or Custom - are backed by a global network of experienced Distributors, Representatives, highly skilled Field Service and Customer Support Professionals.
Laser Product Line
Eclipse® 100Y |
XPRESSTM Model EP |
Laser Markers in Action - Videos
Laser Data Specification Sheets
Custom Laser Workstations and Enclosures
For more information about Eclipse Lasers use this form:
For a more detailed response, please include your Company, Address, Phone and Fax numbers when requesting information and quotations. Please include your specific application requirements. Name and Email address are required.