Impact Pin Selection Guide

PIN
STYLE		 CONE
ANGLES		 MATERIALS* LENGTH MAJOR
DIAMETER		 MINOR
DIAMETER		 MARKERS APPLICATIONS NOMINAL
STROKE
LENGTH		 TYP. MAX
DEPTH OF
MARK**
25S 22°
30°
45°
60°		 Carbide, Powdered Metal 1.8"
45mm		 0.19"
4.8mm		 0.09"
2.4mm

TMP4210
TMM5400
TMP3200
TMM4200
TMM4250

 Extremely fast, limited penetration.
For marking small characters on relatively smooth surfaces.
Pneumatically driven.		 0.38"
9.6mm		 0.0025-0.011"
0.06-0.28mm
25L 22.5°
30°
45°
60°		 Carbide, Powdered Metal 2.2"
55mm		 0.19"
4.7mm		 0.09"
2.4mm		 TMP6100
TMM5100
TMP1700
TMP3200
TMM7200		 Fast, limited penetration marking.
For marking small characters on relatively smooth surfaces.
Pneumatically driven.		 0.50"
12.7mm		 0.0025-0.016"
0.06-0.40mm
25XL 22.5°
30°
45°
60°		 Carbide, Powdered Metal 2.5"
64mm		 0.19"
4.7mm		 0.09"
2.4mm		 TMP6100
TMM5100
TMM7200
TMP1700
TMP3200
DPP2000		 Similiar to 25L. Extra length for recessed or hard to reach marking surfaces.
Pneumatically driven.		 0.50"
12.7mm		 0.0025-0.016"
0.06-0.40mm
25XLE 30°
45°		 Carbide 1.8"
46mm		 0.16"
4.0mm		 0.09"
2.4mm		 Benchmark®320
Benchmark®460
TMP3200E 		Fast, limited penetration marking.
For marking small characters on relatively smooth surfaces.
Electrically driven.		 0.15"
3.8mm		 0.0025-0.011"
0.06-0.28mm
101 30°
45°
60°		 Carbide, Powdered Metal 3.9"
99mm		 0.31"
7.9mm		 0.15"
3.9mm		 TMM5100
TMM7200		 For deep marks, large dots and characters,
and/or rough surfaces.
Pneumatically driven.		 0.75"
19mm		 0.006-0.022"
0.15-0.56mm
150s 30°
45°
60°		 Powdered Metal, Carbide-Tipped 2.75"
70mm		 0.62"
15.7mm		 0.37"
9.5mm		 TMP6100
TMM5100
TMM7200
TMP1700
DPP2000		 Similiar to 101. High speed marking.
Pneumatically driven.		 0.25"
6.35mm		 0.006-0.022"
0.15-0.56mm
150SA 30°
45°		 Carbide-Tipped 2.75"
70mm		 0.62"
15.7mm		 0.37"
9.5mm		 TMP6100
TMP3200
TMM4200
TMP4210
TMM4250
TMM7200
TMP1700 		Similiar to 150s. 0.75"
19mm		 0.006-0.022"
0.15-0.56mm
150 30°
45°		 Powdered Metal 5.25"
133.4mm		 0.62"
15.7mm		 0.37"
9.5mm		 TMM7200
TMP7000 		Very heavy duty, deep penetration, large character marking; and/or very rough surfaces such as castings and mill surfaces. Pneumatically driven. 1.00"
25.4mm		 0.020-0.030"
0.51-0.76mm
*Carbide = Tungsten Carbide (Hardness approximately 92 Rockwell A), Powdered Metal (Hardness 63-65 Rockwell C)
**Varies with material hardness, cone angle and marking head utilized.

IMPACT PIN SELECTION GUIDE		 IMPACT PIN SELECTION GUIDE

This page uses coding that is only viewable with Netscape and Microsoft Explorer versions 3.0 or higher.
For best results print this page in Landscape Mode. This can be found within the print setup of your browser.